Everett, WA · Serving Snohomish County and nearby areas

Licensed, bonded & insured · WA #VISIOFL937R6

Mon–Fri 8:00 am – 8:00 pm · Sat 10:00 am – 5:00 pm

A roller spreading clear glossy finish across an oak floor

Sand, stain & refinish

Hardwood Floor Refinishing

Vision Flooring LLC refinishes hardwood floors in Everett, Snohomish County and parts of King and Skagit Counties. We sand down to fresh wood, add a new stain color if you want one, and apply three coats of finish, with dust control. We’re family owned, established in 2006, and every project starts with a free in-home estimate.

At a glance

Typical labor
$4–$6 per sq ft, 3 coats included
Stain color
$0.75–$1.50 per sq ft, optional
Finishes
Water-based or Swedish Finish; matte, satin or semi-gloss
Back home
Usually the next day; furniture after 3 full days

What refinishing does

A like-new floor from the wood you already have

Refinishing is often the best-value way to make a worn or dated hardwood floor look new again, and it’s how you change the color of the wood you already have. Sanding takes the old finish, scratches and worn areas down to fresh wood. Then the floor gets an optional stain color and three coats of new protective finish.

Not every floor can look brand new. Deep pet stains, water damage, old repairs and how much wood is left all affect the result. We look at your floor first, tell you honestly what to expect, and put real stain samples on your own floor before anything is decided.

Browse stain and sealer colors · See refinished floors

Included in a full refinish

  • An inspection of the wood, the finish and any stained, damaged or loose boards
  • Preparation and dust-control equipment around the work area
  • Sanding down to fresh wood
  • Your stain color, tested on your floor first (optional, priced separately)
  • Three coats of finish, buffed between coats when the product calls for it
  • Final cleanup, inspection and a walkthrough with you
  • A Customer Project & Warranty Package with care instructions

Our process

How we refinish your floor

  1. Step 1: Inspect and plan

    We check the wood, the existing finish and any stained, damaged or loose boards, then go over colors, finishes and sheens with you.

  2. Step 2: Prepare and protect

    Furniture comes out of the work area (moving is available as a separate quote). We mask what needs protecting and set up dust control.

  3. Step 3: Sand to fresh wood

    The floor is sanded down to fresh wood. Board repairs or replacement happen now, when they’re part of your estimate.

  4. Step 4: Stain (optional)

    Your chosen color goes on after you’ve approved samples on your own floor.

  5. Step 5: Three coats of finish

    Sealer and finish coats go on according to the product system, with buffing or screening between coats when it’s required.

  6. Step 6: Clean up and walk through

    Final cleanup and inspection, then we walk through the floor with you and go over care and waiting times.

Refinish or recoat?

Choose the right level of work

A floor that is dull but not worn through may only need a screen and recoat. Read refinish, recoat or just clean?

Screen & recoat

about $2 per sq ft

  • For floors finished in roughly the last 10 years that look dull but have no major wear
  • We buff the existing finish and add a fresh protective coat
  • Keeps the same color; recommended every 5–7 years
  • Won’t remove deep scratches, dents or stains
  • Floors cleaned with wax or oil soap may need a full refinish instead

Finishes

Water-based or Swedish Finish?

Water-based finishes have a lower odor. You can usually return home the day after we finish, and area rugs can go back down after one week.

Swedish Finish is an oil-based, acid-cured finish known for durability and resistance to heavy traffic, water and scuffing. It has a strong odor and high VOCs while it goes on and cures, so everyone needs to be out of the home during application, and area rugs wait a full three weeks.

Either way, you choose the sheen: matte, satin or semi-gloss. We’ll help you pick what fits your home and how you live.

Getting ready and coming home

  • Before: clear furniture and personal items from the work area, or add furniture moving to your estimate.
  • During: no one can walk on the floor while stain and finish go on, so plan to be out.
  • Back home: generally the day after we finish, following the product’s instructions.
  • Furniture: wait at least 3 full days, use felt pads, and lift instead of dragging.
  • Area rugs: 1 week with water-based finish, 3 weeks with Swedish Finish.

Full curing takes longer than these waiting times. We follow the specific product’s instructions.

Pricing

Typical refinishing prices

Approximate labor guidelines, not quotes. Your written estimate lists every item separately.

Typical hardwood refinishing prices
ServiceTypical labor
Sand & refinishThree coats of finish included; stain not included $4–$6 per sq ft
Stain colorHeavily pigmented colors such as white or gray may cost more $0.75–$1.50 per sq ft
Screen & recoatSame color, fresh protective coat about $2 per sq ft
Minimum project price $800

Board replacement, masking and furniture moving are priced separately at your estimate.

Good to know

  • Board replacement isn’t automatic. Ask for it at your estimate so we can price it.
  • Pet stains can stay visible unless the affected boards are replaced.
  • We generally don’t take very small jobs, such as sanding one small section, patch repairs or color-matching only.
Get a rough price in a minute

Our work

Refinished floors

Hardwood floor during refinishing, with a floor sander in the roomBefore
The same hardwood floor after sanding and refinishingAfter
The same hardwood floor before and after sanding and refinishing. Drag the slider to compare.
Living room with a vaulted ceiling, an arched window and a fireplace, with the hardwood floor before refinishingBefore
The same living room after the hardwood floor was sanded and refinishedAfter
A living room with a vaulted ceiling, before and after sanding and refinishing. Drag the slider to compare.

A recent refinish in Mukilteo

The finished great room, looking out to the water
During: the great room sanded down to bare wood
After: the finished floor in afternoon sun
After: the refinished kitchen floor

Reviews

What customers say about our hardwood floor refinishing

We had an existing hardwood floor in our kitchen, downstairs bath, and downstairs hallway. We asked Alex to install new hardwood flooring in our dining room and living room and to make them all match. They did a very nice job feathering the dining room wood into the existing kitchen wood. All of the existing floors were stripped and the final coating matched all the way through. His crew was very professional. The…

Read the full review

We had an existing hardwood floor in our kitchen, downstairs bath, and downstairs hallway. We asked Alex to install new hardwood flooring in our dining room and living room and to make them all match. They did a very nice job feathering the dining room wood into the existing kitchen wood. All of the existing floors were stripped and the final coating matched all the way through. His crew was very professional. The only issue we encountered was a miscommunication of whether or not the floor was to be stained. Stain had not been quoted, though I thought I had asked for it. It turned out that we liked the look of the swedish finish without any stain, so this issue became moot.

Michael Cato

Alex did the floors in our house and they are incredible. It was great working with him in choosing the correct stain and finish for us. He order the wood, installed, sanded, stained, and applied finish. The finish product is beautiful! He truly stand by his quality. Thank you Alex!

Cast

Read more reviews

FAQ

Hardwood refinishing questions

Should I refinish or recoat my hardwood floors?

Recoat if the floor looks dull but the finish isn’t worn through. Refinish if it’s worn to bare wood, has deep scratches, or you want a new color. A screen and recoat adds a fresh protective coat and keeps the same color; we generally recommend it every 5–7 years.

A full sand and refinish takes the floor down to fresh wood and is typically needed every 15–25 years, depending on use. Read refinish, recoat or just clean?

How many coats of finish do you apply?

Three finish coats are standard on every full refinishing project, unless you ask for something different or the product requires another approach.

Do you refinish stairs?

Yes. We refinish stair treads and risers, and sometimes the rails too. Every staircase is different and not all of them can be refinished, so we look at yours during the free estimate and price it there. We also install new hardwood treads and risers.

Can you change the color of my floors?

Yes, if your hardwood can be sanded. A full sand and refinish takes it down to fresh wood, and the new stain color goes on before the finish coats. We apply stain samples right on your floor so you can see real colors before you decide. A recoat alone keeps the color you have. Browse stain and sealer colors.

Do I need to leave my home during refinishing?

No one can walk on the floors while stain and finish coats are being applied, so plan to be out during that time. You can generally return the day after we finish, following the product’s instructions. With Swedish Finish, everyone must leave the home during application.

When can I walk on the floor, move furniture back and put rugs down?

You can generally walk on the floor the day after the finish is applied. Wait at least 3 full days before putting furniture back. Area rugs: at least 1 week for water-based finishes and the full 3 weeks for Swedish Finish.

Is it normal to see small marks or an uneven sheen after refinishing?

Yes, most are temporary and fade as the finish cures. Give blemishes, slight color differences and screen or brush marks 60–90 days, and an uneven sheen up to 120 days. Judge the floor standing up in normal light, not in window glare. If marks are still obvious after that, call us. See what’s normal in a new finish.

What is the difference between water-based finish and Swedish Finish?

Water-based finishes have a lower odor, and you can usually return home sooner. Swedish Finish is very durable but has a strong odor, so the home must be empty during application, and rugs wait longer. We’ll help you choose, along with your sheen: matte, satin or semi-gloss.

Will sanding remove pet stains and water damage?

Not always. Deep pet stains and water-damaged wood often need board replacement, which is quoted separately when you request it. We’ll show you what we find during the estimate.

Is refinishing dusty?

We use dust-control equipment and mask the work area to keep dust to a minimum. It greatly reduces dust, but no sanding process is completely dust-free.

Can I wax or use oil soap on my hardwood floors?

Not on a Swedish or water-based finish. Wax and oil soap leave a residue that can stop a future coat from bonding, which may turn a simple recoat into a full refinish. See our wood floor care guide.

See all flooring questions

Guides

Learn more about refinishing

More services

Other ways we can help

New wide-plank hardwood floor in a living room with a fireplace

Hardwood Floor Installation

New solid and engineered hardwood flooring, prefinished or finished on site, installed with careful attention to detail.

Wood-look plank floor in a living room with a white sofa

LVP / LVT Installation

A realistic wood or stone look that handles everyday spills, pets and busy households.

Wood-look plank floor in a dining area

Laminate Installation

An affordable wood look with a hard-wearing surface. A smart pick for dry living areas and bedrooms.

Wide white baseboard and column base on a wood floor

Baseboard Installation

New baseboards, door and window casing, quarter round and shoe molding, with your new floors or on their own.

Where we work

Based in Everett, Washington, serving Snohomish County and parts of King and Skagit Counties.

Bright living room with a light hardwood floor, a sofa and a kitchen in the background

Free in-home estimates

Let’s talk about your floors

Tell us a little about your project and we’ll set up a free in-home estimate. We usually reply the same business day.

Our Reviews

Not ready yet? Get a rough price with our free flooring calculator.